A393 Mesh
Product Specification
| KG/M | N/A |
|---|---|
| Dimensions | 2.4×1.2m, 3.6×2.0m, 4.8×2.4m |
| Pitch Main (mm) | 200 |
| Pitch Cross (mm) | 200 |
| Diameter Main (mm) | 10 |
| Diameter Cross (mm) | 10 |
Product Description
Need something a bit more complex?
Get in touch today and we will make sure you get the support you need.
Upload your drawings
Estimated delivery: September 15, 2026 – September 18, 2026
A393 mesh is a square reinforcement fabric made from 10mm steel wires arranged at 200mm centres in both directions. Its equal wire layout provides the same nominal reinforcement each way.
South Steel supplies A393 mesh in sheet sizes for domestic, self-build and trade projects.
Choosing the Right A393 Sheet Size
A393 mesh is available in more than one sheet size, so check the dimensions shown in your project information rather than assuming every sheet is the same.
The reinforcement grade remains A393 across the available sizes. Use the engineer’s drawings, calculations or reinforcement schedule to confirm the correct grade and format.
A393 Mesh: Grade, Grid and Sheet Options
A393 uses a consistent 10mm wire grid at 200mm centres in both directions. Key details include:
- 10mm wires in both directions
- 200mm spacing throughout
- 393mm² nominal steel area per metre each way
- Sheet sizes of 2.4m × 1.2m, 3.6m × 2.0m and 4.8m × 2.4m
The “393” identifies the nominal steel area provided per metre, rather than the wire diameter or physical sheet size.
When matching A393 to project documents, check the full specification, particularly where a specific sheet size has been listed.
Where A393 Mesh May Be Specified
A393 mesh may be used where the reinforcement design calls for the same nominal steel area in both directions. This can include slabs, floors, walls and other reinforced concrete elements, depending on the engineer’s design.
Always match the grade, sheet size, laps and positioning to the project drawings or reinforcement schedule rather than choosing mesh by application alone.
Ordering A393 Mesh Through South Steel
Once the required grade and sheet size are confirmed, customers can order through the South Steel website.
For projects involving several mesh sheets or a wider reinforcement package, South Steel can support quotation enquiries based on drawings or schedules.
Browse the wider reinforcing mesh range for additional mesh grades and formats.
More Steel Products From South Steel
Browse the reinforcement steel range for rebar, cut and bent reinforcement and related accessories. Beams, columns, channels, angles and hollow sections are available through South Steel’s structural steel range.
As a UK online steel supplier, South Steel supports straightforward product orders and larger drawing-based requirements. For product enquiries or quotation support, contact South Steel.
FAQs
What Does A393 Mean in Reinforcement Mesh?
The “393” refers to the nominal steel area of 393mm² provided per metre in each direction.
What Sheet Sizes Are Available for A393 Mesh?
South Steel lists A393 in 2.4m × 1.2m, 3.6m × 2.0m and 4.8m × 2.4m sheet sizes.
Does A393 Mesh Provide the Same Reinforcement in Both Directions?
Yes. Its 10mm wires are spaced at 200mm centres both ways.
What Wire Size Does A393 Mesh Use?
A393 uses 10mm reinforcement wires throughout the square grid.
How Do I Choose the Right A393 Sheet Size?
Use the dimensions shown in the project drawings, reinforcement schedule or material list. If a particular sheet size is specified, order that format rather than choosing by convenience alone.