A193 flying ends Mesh
Product Specification
| KG/M | 30.53 kg |
|---|---|
| Dimensions | 4.8×2.4m |
Product Description
Need something a bit more complex?
Get in touch today and we will make sure you get the support you need.
Upload your drawings
Estimated delivery: September 16, 2026 – September 19, 2026
A193 Flying Ends Mesh is a square reinforcement mesh made with 7mm wires at 200mm centres, with projecting wire ends built into the sheet layout. This format is used where the project design specifies A193 reinforcement with a flying-end configuration.
South Steel supplies A193 Flying Ends Mesh online for domestic, self-build and trade projects where the mesh type is confirmed.
What the Flying-End Format Changes
The flying-end format affects the sheet edges rather than the A193 reinforcement grade itself. Selected wires extend beyond the final crossing wire, creating projecting ends that can form part of the lap arrangement shown on reinforcement drawings.
Check both the A193 grade and flying-end format before ordering. For structural concrete work, the sheet type, lap arrangement and positioning should follow the engineer’s drawings or reinforcement schedule.
A193 Grade and Sheet Details
A193 Flying Ends Mesh combines the standard A193 reinforcement pattern with a flying-end layout. Key product details are:
- 7mm reinforcement wires
- 200mm wire spacing
- 4.8m × 2.4m sheet dimensions
- 193mm² nominal steel area per metre
- Approximate sheet weight: 30.53kg
The “193” is the grade reference and relates to the nominal steel area provided by the mesh. The projecting ends are a separate feature of the sheet layout.
When ordering, use the full product description rather than the A193 grade alone. Standard A193 mesh may share the same basic wire specification but use a different edge configuration.
Ordering A193 Flying Ends Mesh
When A193 Flying Ends Mesh appears on the project drawings or reinforcement schedule, check that the sheet format matches the specification before placing the order.
South Steel supports larger or schedule-based requirements involving reinforcement products.
Source Other Steel Alongside Your Mesh
Browse South Steel’s reinforcing mesh range for other sheet formats and grades, or explore reinforcement steel products including rebar, cut and bent reinforcement and accessories.
South Steel also supplies beams, columns, channels, angles and hollow sections through its structural steel range. As a UK online steel supplier, South Steel supports product orders and larger project requirements.
For product queries or quotation support, contact South Steel.
FAQs
What Does “Flying Ends” Mean on A193 Mesh?
Flying ends are reinforcement wires that project beyond the final crossing wire at selected sheet edges.
Does A193 Flying Ends Mesh Still Use the Standard A193 Grade?
Yes. The underlying A193 reinforcement specification remains the same. The difference is the flying-end sheet configuration.
What Wire Size Is Used in A193 Flying Ends Mesh?
A193 uses 7mm reinforcement wires at 200mm centres in both directions.
How Can I Tell A193 Flying Ends Mesh From Standard A193 Mesh?
Both use the same A193 reinforcement grade, but the flying-end version has projecting wires at selected sheet edges.
Can A193 Flying Ends Mesh Be Included in a Larger Reinforcement Order?
Yes. South Steel can support larger enquiries combining mesh with rebar, cut and bent reinforcement or related products.